Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
ASTM and AISI to JIS Conversion?
- Thread starter jthblues
- Start date
Basically you have to have the JIS book and the ASTM AISI SAE books also. AFter a few time going through the process you will begin remembering how to start.
IE: SAE specs J403 is carbon steel, J404 is alloy steel, J405 is stainless. or SPHC Means Steel Plate Hot-Rolled Commercial quality. It's a matter of becoming familiar with the various specifications you have to deal with. You will eventually only need a few to cover most any type of steel you deal with.
good luck this can be an annoying topic.
nick
IE: SAE specs J403 is carbon steel, J404 is alloy steel, J405 is stainless. or SPHC Means Steel Plate Hot-Rolled Commercial quality. It's a matter of becoming familiar with the various specifications you have to deal with. You will eventually only need a few to cover most any type of steel you deal with.
good luck this can be an annoying topic.
nick
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question