Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Attaching nozzle to boot

Status
Not open for further replies.

sksmechanical

Mechanical
Feb 18, 2010
36
US
I have a boot (12.75"OD x 2'-6"L) attached to the shell at 180 degress (horizontal vessel) and I need to attached a 2" nozzle and 3/4" couplings to this boot. Any help is greatly appreciated
 
Replies continue below

Recommended for you

Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top