Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

AutoCad trouble...hungapp question?

Status
Not open for further replies.

PBW2

Civil/Environmental
Apr 25, 2003
58
We are having issues with CAD when trying to open drawings from the open icon or trying to "saveas". If we set filedia to 0 we can open from explorer. The error we are getting is:

szAppName : acad.exe szAppVer : 23.0.116.0 szModName : hungapp
szModVer : 0.0.0.0 offset : 00000000

This is happening on (2) separate machines. The problem started when we tried to network (ethernet) an Epson Printer. We've googled with no luck. Any suggestions would be greatly appreciated.

AutoCad 2007
Windows XP

Also posted in the Engineering programs/apps (general) Forum
 
Replies continue below

Recommended for you

Don't forget to link back to the engineering programs/apps file, so that posters here can see that you have the same question going in another forum.
B.E.

You are judged not by what you know, but by what you can do.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor