Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Autoclave curing of rubber rolls

Status
Not open for further replies.
donaloriain

donaloriain

Materials
Jan 15, 2010
7
Can anyone recommend a good source for information on autoclave steam curing of rolls of calendered rubber sheeting? I'm mostly interested in trouble shooting of defects such as blisters, voids, etc. Any guidance would be appreciated.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Te recomiendo "How to improve rubber compounds" de John S. Dick.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

ivyliu
  • Locked
  • Question
Post curing for LSR
Replies
1
Views
507
Compositepro
Compositepro
A
  • Locked
  • Question
Degradation of white nitrile butadiene rubber hose
Replies
2
Views
1K
TugboatEng
TugboatEng
H
  • Question
Polyamide to EPDM rubber bonding
Replies
4
Views
6K
Henry Chiansky
H
A
  • Locked
  • Question
uncured silicon rubber moulding
Replies
1
Views
1K
3DDave
3DDave
AKHILESH MAURYA
  • Locked
  • Question
RUBBER SURFACE PROBLEM
Replies
1
Views
604
btrueblood
btrueblood

Part and Inventory Search

Sponsor

Back
Top Bottom