Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Automatic Drawing creation in CREO

Status
Not open for further replies.

RRoosshhaann

Mechanical
Apr 10, 2017
10
Hey Guys,
Back with New topic.
I have a requirement in my Org for automatic drawing creation. To what extent can drawing can be automatically generated.
Please help me with some programming techniques. I would also like to build an auxillary app for creo for this. I don't have any basics of programming but im open to learn if someone willing to help.
Help is greatly appreciated.

 
Replies continue below

Recommended for you

Drawing templates are a good start for laying out the views and displaying the dimensions but at some point you have to have a human look at the drawing and make intelligent decisions.

Family table parts/assemblies can be used to make multiple drawings. Once an initial drawing is made you can just change the model to a different family instance and rename the drawing. This could be automated.

----------------------------------------

The Help for this program was created in Windows Help format, which depends on a feature that isn't included in this version of Windows.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor