Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

AVGAs Tank Design 1

Status
Not open for further replies.

Adeeba

Mechanical
Nov 13, 2014
6
Hello
I need to design AVGAS storage tank.
it is totally new for me. can anyone please suggest, how to start design
 
Replies continue below

Recommended for you

There is an older text called aviation fuels by smith, which covers storage. Undoubtedly there is a heap of standards as well.
 
Suggest starting with American Petroleum Institute [API] website.

Aviation Fuels pipeline, transfer, storage, dispersal, in-aircraft fueling, cleanliness, chemical monitoring, electrical/environmental safety, etc-etc-etc is a large topic.
Documents that I referred to are...

API PUBL 1500 - Storage and Handling of Aviation Fuels at Airports [canceled?]
FAA AC00-34 Aircraft Ground Handling and Servicing
FAA AC150/5230-4 Aircraft Fuel Storage, Handling, and Dispensing on Airports


CAUTION. These documents list very important related documents from other organizations and agencies.

I assume that You have inquiries into this topic in the eng-tips.com petroleum forums?

Regards, Wil Taylor

o Trust - But Verify!
o We believe to be true what we prefer to be true. [Unknown]
o For those who believe, no proof is required; for those who cannot believe, no proof is possible. [variation,Stuart Chase]
o Unfortunately, in science what You 'believe' is irrelevant. ["Orion", Homebuiltairplanes.com forum]
 
Greg- easier said than done. [pipe].

Wil helps out as always. What a great guy.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor