Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations The Obturator on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Axi-symmetric model

Status
Not open for further replies.
portliner

portliner

Automotive
Jan 9, 2011
98
I am plotting the reaction force for a node in an axi-symmetric model. Is the force related to a complete revolution or a sector of one radian or an other angle? Thanks in advance Portliner
 
Status
Not open for further replies.

Similar threads

A
  • Question
Symmetric boundary conditions
Replies
3
Views
1K
Ali asger
A
SJ8
  • Question
Define non symmetric material behaviour
Replies
2
Views
1K
ShiningEngineer
ShiningEngineer
Nir_k
  • Question
Failure of symmetric boundary constraints in Abaqus
Replies
1
Views
1K
FEA way
FEA way
omega_heiki
  • Question
Submodeling from pie-slice with symmetric BC
Replies
4
Views
1K
omega_heiki
omega_heiki
Saks1235
  • Question
ABAQUS:- Problem with Concentrated AM model Vs Goldak AM model
Replies
5
Views
2K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom