Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

B.31.3/ By Others ? 1

Status
Not open for further replies.

Romain_WeldingIWE

Industrial
Dec 15, 2021
3
Hi All,

My question must be very easy for you,

In B31.3, What mean procedure qualification by Others, precisely Others ? Who is considered as Others ?

Thanks for you supports
 
Replies continue below

Recommended for you

give us a clue as to which section you mean - it's a big code.


Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
 
Check B31.3-2020 Sections 328.1, 328.2.2, and 328.2.3.

Essentially, anyone who is not the current employer of the welder.
 
Generally speaking, ASME piping codes and construction codes require the employer to qualify their WPSs and welders. However, there are provisions that allow the contractor to purchase "Standard WPSs" from the American Welding Society. Contractor does have to jump through some hoops before using the SWPS for production welds. The steps required are listed in Section IX, Article V.

That being said, be aware that the construction code has to be reviewed to see if the use of SWPSs is permitted. The SWPSs are not permitted if CVN testing is required or (if I remember correctly) when PWHT is necessary. In the case of B31.3, SWPSs are not allowed for systems identified as "High Pressure".

Best regards - Al
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor