Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

b.o.d equation? 1

Status
Not open for further replies.

osama800

Mechanical
May 11, 2006
14
0
0
YE
hi friends:

is there any one can help me and give the equation i must used to calculate b.o.d in the waste water systems ?

thank u in advanse for any help
best regards.
 
Replies continue below

Recommended for you

BOD is not calculated by equation...it is determined by standardized laboratory procedures available from any decently equipped water analytical laboratory.


Orenda
 
BOD is typically calculated over a 5-day period (BOD5)

This is the simple calculation:

BOD5 = (DOi - DOf)/P

DOi = Initial dissolved oxygen
DOf = Finial dissolved oxygen
P = dilution factor = volume of wastewater/(volume of wastewater + dilution water)

I would imagine a laboratory would use a seeded test to make sure there is an adequate bacterial population to carry out the biodegradation.
 
Status
Not open for further replies.
Back
Top