Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in

B127 or B164 1

Status
Not open for further replies.
PAN

PAN

Mechanical
Apr 25, 2001
549
0
0
SG
For alloy 400, the user's requiremnet is flat bar (12 mm. thickness, 90 mm. width). What's the suitable reference ASTM B127 or B164?
 
Replies continue below

Recommended for you

Sort by date Sort by votes
ASTM B 164 defines a bar as being at least 3.2 mm thick and up to 254 mm wide, so you should order this material according to ASTM B 164.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Mike Mike
  • Locked
  • Question
Am I supposed to specify mortar type M, S, N, or O? 1
Replies
9
Views
18
phamENG
phamENG
LEB1
  • Locked
  • Question
BS EN 10213 Single Min or Avergae Min for impacts
Replies
0
Views
1
LEB1
LEB1
Cruisnick
  • Locked
  • Question
Selecting material standard for austenitic steel fitting (ASTM A 182 or ASTM A 403) 2
Replies
8
Views
9
MickMc
MickMc
qaengineer1969
  • Locked
  • Question
ASTM A53 Type E Grade B or API5L Grade 8
Replies
0
Views
1
qaengineer1969
qaengineer1969
metalinspector
  • Locked
  • Question
A 450/450M or A 530/530M
Replies
2
Views
3
metengr
metengr
Back
Top