Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Backyard Rope Tow

Status
Not open for further replies.

dgmeche

Mechanical
Nov 15, 2006
2
Hoping to find some help on how to size a motor for a backyard rope tow. I would like to design a system that can either run on a small gas engine or an electric motor. Any pointers on where to start are much appreciated.

Many Thanks!
dgmeche
 
Replies continue below

Recommended for you

Check out this website -- and search for "backyard" or "ropetow" and there is excellent information on making your own ski lift.


I built a ski lift on a pretty steep hill using wire rope --its about 1000' long and runs on a 10HP lawn tractor engine -- the details are on the website listed -- send me a message if you have any questions and I'll be more than happy to help out. chris.
 
BellHollowSkiBowl,
Thanks for your response. I visited the site you listed and could not find what you were referring to. If you could point me in the right direction it would be much appreciated.

VT is getting dumped on!

Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor