Baker Tech Facts 3

[jmcgrath]

Hi All,

Does anyone out there know where I can get an electronic copy of the baker Tech Facts book? I have tried Bakers web site and general searches on various sites all with no luck.

Any help would be appreciated.

John McGrath

 

[Hush]

These are hard to find. My hardcopy was literally handed down to me by a retiring tool push, kind of like passing the torch. I also snagged a CD copy at an Oil show a couple of years back, it has the following contact info.

Baker Oil Tools Literature Department
6023 Navigation
Houston, TX 77011

Phone 713 923-9351
Fax 713 923-9657

Schlumberger also has a very good handbook.

 

[jmcgrath]

Thanks Hush,

I'll get in touch with Baker and see if I can get a copy. If not would it be possible to get a fax of your paper charts???

Regards,

John McGrath

 

[jmcgrath]

Sorry Hush,

Forget about the faxing of charts bit of the last post, I was thinking that there was wire fall back charts in the BTF book. There isnt. I'll still follow up the load for the e version of the book though.

Thanks,

John

 

I work for Baker Inteq and would be happy to send you a CD copy of the tech facts and other resources disks. All I need is for you to email me your address. My email is bill.alsobrook@inteq.com.