Batch Material Change with Configurations

[overkill4]

Hi All,

I have an assembly that I would like to be able to show with different materials in both the assembly and drawing to show what the mass and appearance differences would be. Right now each part has one configuration and one material.

What is the best way to create separate configurations with different materials other than me opening each part, adding a config and changing the material.

Thanks in advance.

60% of the time, it works every time.

 

[JMirisola]

Design table(s)

Jeff Mirisola, CSWP
Design Manager/Senior Designer
M9 Defense
My Blog

 

[Gupta65]

Try this macro from Lenny

http://www.lennyworks.com/solidworks/SWXMacros/MaterialProperties.zip.

Also try this by Luke

http://batchprocess.co.uk/

Deepak Gupta
SW 2009 SP4.1 & 2007 SP5.0
MathCAD 14.0
Boxer's Blog

 

[overkill4]

Ah yes Design tables. Thanks.

60% of the time, it works every time.