Oct 21, 2004 #1 engAlright Mechanical Jun 12, 2003 240 I'm curious - how does one go about becoming a Solidworks VAR?
Oct 21, 2004 #2 SBaugh Mechanical Mar 6, 2001 6,686 Your going to have to contact SW on this. I know there are quite a few hurdles you must overcome before you can become a VAR. One big one (IMO) is you have to have atraining center for your customers. You have to approved in your area by SW. You have to employee a person that is Certified in SW. Those are just some of the ones I know. Regards, Scott Baugh, CSWP http://www.3dvisiontech.comhttp://www.scottjbaugh.com faq731-376 Upvote 0 Downvote
Your going to have to contact SW on this. I know there are quite a few hurdles you must overcome before you can become a VAR. One big one (IMO) is you have to have atraining center for your customers. You have to approved in your area by SW. You have to employee a person that is Certified in SW. Those are just some of the ones I know. Regards, Scott Baugh, CSWP http://www.3dvisiontech.comhttp://www.scottjbaugh.com faq731-376
![[pc2]](/data/assets/smilies/pc2.gif "[pc2] [pc2]")