Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Beech 400A

Status
Not open for further replies.

Lyster1

Aerospace
Jan 19, 2007
2
Just wondering if any of you out there have experience with the seat tracks of the Beech 400A and might have the cross sectional dimensions. I'm trying to design a track fitting but don't really have this data available without pulling up carpet (which the owner doesn't want me to do).

Thanks in advance.
 
Replies continue below

Recommended for you

I'd bet it's made to some sort of industry standard, but I am not a structures person and I don't have any first hand experience with it.
 
i suspect it's something generic/standard, like "douglas"track.

maybe the easiest thing to do is take off one of the other seats ?
 
It's a mushroom head type, not an MS profile. Check the SRM section under extruded profiles, I don't have that handy.

Rather silly the owner won' let you pull up the carpet.
 
I've got a Beechjet that shares hangar space with us; i'll have a look at it tomorrow.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor