BELT TIME PULLY PROFILE

[SAEEDGH]

HI.
I want to design and manufacture a pulley for TP800H100 timing belt with 18 tooth. I want to know standard for manufacture this pulley but I didn't find anything. the approximate drawing is as shown below. i need teeth profile dimensions and standard for it.

specification of belt ==>TP800h100: Twin Power Timing Belt - TP, 0.5000 in Pitch, 1.0000 in Width

 

[3DDave]

It appears to be a proprietary tooth form; you may contact Gates and see if they will help or will license that information to you.

 

[mfgenggear]

Op
Look in the machinery handbook, or
Website of stock drive products. As David suggested ascwell