Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bending Simulation

Status
Not open for further replies.

camilia

Mechanical
Feb 24, 2011
3
Can anyone comment/Guide a bending simulation at 90 angle and see stresses at 90 angle?
 
Replies continue below

Recommended for you

Model the die as a rigid surface! In the *contact pair the rigid surface must be the master surface

/Stig
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor