Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

best method 1

Status
Not open for further replies.
siridi

siridi

Petroleum
Jun 9, 2020
6
0
0
DZ
Dear all,
which method is best and required for pitting corrosion between A923 method c and G48 method A.
regards.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
A923 Test Method C is more defined for application to duplex and superduplex stainless steels. G48 testing in accordance with ISO 17781 is the current international standard for DSS/SDSS materials.

Steve Jones
Corrosion Management Consultant


All answers are personal opinions only and are in no way connected with any employer.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Osama Abdel Latif
  • Locked
  • Question
what is the best required load chan
Replies
1
Views
22
LittleInch
LittleInch
NW_Wash_Eng
  • Locked
  • Question
ARV/PRV/VB Best Practices
Replies
13
Views
42
NW_Wash_Eng
NW_Wash_Eng
tooby-tube
  • Locked
  • Question
JIC/AN installation best practice 3
Replies
8
Views
32
EdStainless
EdStainless
Larbye
  • Locked
  • Question
Best practice for installation of stop check globe valves
Replies
4
Views
22
Larbye
Larbye
quizzical1
  • Locked
  • Question
Best plastic to use for potable hot water
Replies
3
Views
26
quizzical1
quizzical1
Back
Top