bblazie
Mechanical
- Jan 16, 2013
- 2
There was a great thread a while back about this, and I was looking for some more help. I understand to get the bi stable effect i need a h/t of 2.82 or greater. I need a combined travel of .025" and am constrained to a diameter of .096. I need about 50 Grams of force at the top, and have about 150 grams of actuation force available. If I get the same travel up and down, then the h=.0125 and t= about .0046 I should get the bi stable action, What materials will put me in the range I need?
thanks for the help
Bryan
thanks for the help
Bryan