Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SSS148 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bicycle model?

Status
Not open for further replies.

MadMango

Mechanical
May 1, 2001
6,992
Looking for an adult bicycle model, fairly accurate, but does not to be highly detailed (part or assy file).

3DContentCentral did not have any.

[green]"I think there is a world market for maybe five computers."[/green]
Thomas Watson, chairman of IBM, 1943.
Have you read faq731-376 to make the best use of Eng-Tips Forums?
 
Replies continue below

Recommended for you

One of the training staff at Prism Engineering, Niel Sardinas, showed a bicycle that he had modeled. Try e-mailing him. nsardinas@prismeng.com
 
I have a stem that I made for my road bike. It's a one inch quill type, Zero degree rise, 12 cm reach.

Best Regards,

Heckler
Sr. Mechanical Engineer
SW2005 SP 2.0 & Pro/E 2001
Dell Precision 370
P4 3.6 GHz, 1GB RAM
XP Pro SP2.0
NIVIDA Quadro FX 1400
o
_`\(,_
(_)/ (_)

"There is no trouble so great or grave that cannot be much diminished by a nice cup of tea" Bernard-Paul Heroux

 
Thanks to all. This requirement has passed, and the model was not needed in the end. I love our Marketing group.

[green]"I think there is a world market for maybe five computers."[/green]
Thomas Watson, chairman of IBM, 1943.
Have you read faq731-376 to make the best use of Eng-Tips Forums?
 
120 mm stem? You roadies and your crazy geometry... I ride downhill....50 mm stem!
 
Mike,

I ride anything with two wheels.....my garage is full of bikes: mtn bikes (XC, freeride, FS mtnbike tandem & dirt jumper), road bikes, BMX (20" street, & 24" cruiser).....my wife just excepts the fact I'm bike crazy.....
 
Sweet! I've got a Yeti DH9 and a Santa Cruz Heckler...

With a 16 month old daughter my riding has mainly consisted of pulling the kiddie trailer with the heckler.
 
I do local mtn bike races with the FS tandem usually it's my step son as stoker.

o o
_‘\(_`\(,_
(_)/--\/ (_)

Maybe I will hook the burley to the tandem
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor