BIF Digester Gas Flowmeter

[tchaiket]

Folks--

Hope y'all can help with this one. We have an old BIF meter and I would like to find info on how we can get an attachment to send out a 4-20 output from the unit. But the problem is that I can't seem to find anyone who deals with these meters anymore.

Any lead?

Thanks!

 

[quark]

If you have an electronic display unit with the meter then you can trap the signal. Otherwise, buy a dP transmitter and hook it to the flow device.

Some manufacturers of dP transmitters are Emerson Process Controls(Fischer Rosemount), Endress+Hauser and Yokogawa etc,.

 

[tgreif]

why not just try BIF themselves. The original BIF was bought by a group of former employees and are still doing business in flow metering.

http://www.bifwater.com/

They should be able to help you with the calibration of the existing flow element so you can install a modern DP transmitter.