Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

bilinear (elastic plastic ) behavior with hardening

Status
Not open for further replies.
prongs1515

prongs1515

Civil/Environmental
Jan 29, 2014
4
I need to model bilinear (elastic plastic ) behavior with hardening. (something like this... Can I to this using connector elements in ABAQUS. (I have the values for yield force and K values for pre- and post-yield regions.)
 
Status
Not open for further replies.

Similar threads

M
  • Question
Modeling elasto-plastic behaviour of NiTi
Replies
1
Views
1K
FEA way
FEA way
simulation_engineer_2022
  • Locked
  • Question
Modeling viscous behavior of material
Replies
1
Views
164
FEA way
FEA way
SKSA
  • Locked
  • Question
Angle of Internal Friction with Plastic Strain
Replies
1
Views
138
FEA way
FEA way
Gov45
  • Locked
  • Question
Increase in plastic strains after unloading
Replies
6
Views
275
ThomasH
ThomasH
A
  • Question
How can I correctly model the damping behavior in ABAQUS for unidirectional composites to achieve realistic oscillations that decay over time?
Replies
6
Views
2K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom