Bill of materials for a multi-body part?

[KevinDeSmet]

I was wondering if you can generate a bill of materials of a multi-body part? or inside of a product an indented bom that might go along the lines of 1/2/3.1/3.2/3.3/4/5/6 depending on whether its a single part or a part with several bodies as the numbering goes through the product structure.

Certified SolidWorks Professional

 

[ferdo]

Hi,

As far as I know, BoM is available only in assemblies...if you want to "collect" the names of different bodies in CATPart you will need a macro (I believe is not so hard to be done).

Regards
Fernando
cadromania.net - Romanian CAD forums