Bisalloy

[acad96]

Dear All,

I have new jobs to create with Bisalloy materials don’t grades or spec. yet at the moment and I would like to know any body who know about this material or have some experience to share? ……….also do you have any documents for my reference. Thanks in advance

Best regards,

 

[unclesyd]

Bisalloy covers a lot of ground and since you didn't offer any guidance to the type here is the whole lot of quench and tempered plate plus a little more.
I hope you have some stout equipment.

http://www.bisalloy.com.au/Products.asp

http://dspace.dsto.defence.gov.au/dspace/bitstream/1947/3302/1/DSTO-RR-0130 PR.pdf

 

[PeterCharles]

Inadequate steel references have been a continual pain in my life!
"these parts are to be made from bisalloy.." Yes, but which one? "Well bisalloy"
You can replace "bisalloy" with "red diamond", or "sailhard", or "hardox" etc but the discussion is the same!
They can't seem to learn there is more than one grade.

 

[dgallup]

You can get some good info here:

http://www.bisalloy.com.au/files/Techman/Technical Manual1.pdf

I never specify proprietary vendor grades if at all possible. Use industry standard specifications (ISO, JIS, ASTM, etc.).