Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Blocks in layer will not hide 2008

Status
Not open for further replies.

Ralph2

Industrial
Joined
May 3, 2002
Messages
345
Location
CA
Help..
I have inherited a drawing made by numerous people over many years.It has had numerous sections imported into it. (Shop building drawing). There are now some 40 layers and my goal is to incorporate and reduce these to something logical.
But..one of my problems is that "some" blocks of furniture will move into the layer.. but then not hide when the rest of the layer does..
How?.. can I change this behavior.
Many thanks
Ralph
 
My guess is that the blocks were created with entities on different layers. Look here for Fixblock.lsp, the routine will redefine the blocks so all entities are on layer 0, color byblock.

____________________
Acad2006, Terramodel
 
Thank you. That did the trick. And thanks for the link.. will spend some time there looking at some of the other routines.
Ralph
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top