Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

blowing fuse

Status
Not open for further replies.

mbolzman

Computer
Sep 18, 2005
1
Murray 14.5hp lawntractor. When I hit the key, it gives a 1/4 second crank, then blows the fuse. Stator shorted??

Thanks
 
Replies continue below

Recommended for you

If it actually moves a little before blowing the fuse (and even if it doesn't) then it could be a mechanical problem. If the rotor is jammed (dried grass) then the fuse will blow because the rotor needs to turn to limit the current.

See if the blades can be turned by hand when there is no power applied (unplug it completely first!)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor