Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations Toost on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Boiler safety valve relief piping

Status
Not open for further replies.

jackcolli

Mechanical
Apr 28, 2003
1
Is relief piping required from the safety valve to the outside for a 200 HP low pressure steam heating boiler?
 
Replies continue below

Recommended for you

Check your local building codes.
 
AND also with your local boiler inspector....sometimes the building code guys guess at actual boiler codes and the boiler inspector has to slap them down.

If you discover it needs piped, be sure to configure the piping and supports properly as per ASME.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor