Feb 8, 2001 #1 JohnWN Computer Oct 2, 1999 10 0 0 GB Can anybody give me a good source for the thread and bolt head friction coeficients for various bolt materials and coatings?
Can anybody give me a good source for the thread and bolt head friction coeficients for various bolt materials and coatings?
Feb 12, 2001 #2 swertel Mechanical Dec 21, 2000 2,067 0 0 US I tend to like this site the best. http://www.boltscience.com/ A secondary site is below. http://www.fastenersources.com/ Hope these help. They have lots of information in them so you'll have to surf around a bit. Sorry I couldn't get a specific link for you. --Scott Upvote 0 Downvote
I tend to like this site the best. http://www.boltscience.com/ A secondary site is below. http://www.fastenersources.com/ Hope these help. They have lots of information in them so you'll have to surf around a bit. Sorry I couldn't get a specific link for you. --Scott
Feb 14, 2001 Thread starter #3 JohnWN Computer Oct 2, 1999 10 0 0 GB Thanks Fastenersources was useful. Upvote 0 Downvote
Feb 19, 2001 #4 Guest Try VDI2330 (German bolted joint standard)or the book by J Bickford ' An introduction to the design and behaviour of bolted joints' From experience the COF of a lightly oiled phosphate coated bolt is around 0.17. But don't quote me on this. Good luck Upvote 0 Downvote
Try VDI2330 (German bolted joint standard)or the book by J Bickford ' An introduction to the design and behaviour of bolted joints' From experience the COF of a lightly oiled phosphate coated bolt is around 0.17. But don't quote me on this. Good luck