Bolt identification? 1

[EdgarIsmael]

Looking to replace new bolts that were pulled out from my Toyota Hiace brake rotor that was screwed against the hub.

Having trouble identifying

https://showbox.bio/

https://tutuapp.uno/

https://vidmate.cool/

grade of the bolts. Its got two radial lines on the head marking, but google research showed bolt marking of 3 radial lines only which is a Grade 5. Base on rule of thumb, grade is determine by number of lines plus two, so naturally my bolt is a Grade 4, but it doesnt exist!

 

[CapriRacer]

I think an SAE grade 5 bolt would work. (or the equivalent - after all, this isn't an American designed vehicle.)

Alternatively, go to a parts store and see if they have something for a different Toyota.

 

[EdStainless]

Wheel and brake, try to buy the OE bolts.
I know that they will be expensive, but this is holding wheels on.
You might try searches for "JIS bolt identification"

= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed