Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

borrow pit in sw Florida 2

Status
Not open for further replies.

shablona

Civil/Environmental
Feb 20, 2005
1
Hi
I am about to dig some test holes on a 200+ acres in order to determine if it will be a suitable borrow pit.i'll be digging with a 30-40 ton excavator.any good hints on what to look for or stay away from? thanks
 
Replies continue below

Recommended for you

My first hint on what to look for would be a Geotechnical Engineer. I am not experienced in siting a borrow pit, but I would imagine it would be more desirable to have a Geotech perform borings and do lab tests to find soils with the desired specs rather than a 40 ton excavator and eyeballing it.
 
Depending on the terrain I would look at the use of a GEOPROBE , a track or truck mounted unit. Since it is a very small machine and uses direct push technologies, you could move four times as fast. Any geotech should have the capability for you.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor