Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bottom Replacement and under tank leak detection system

Status
Not open for further replies.

Inchtain

Petroleum
Feb 21, 2021
132
Dear Sirs,

Is it possible to partially left a Tank to replace part of the corroded bottom and annular plates?

Moreover, is it true that the malfunction or torn CP grid system can not be replaced or repaired when a leak detection system installed under the Tank and the CP system was also provided between the barrier and the bottom steel?

Regards,
 
Replies continue below

Recommended for you

Instead of partially lifting the tank, you may cut a shell window.

You seem to be right reg. the CP question, but I am not 100% sure.

DHURJATI SEN


 
I am afraid I can not really understand your second sentence.
 
partial bottom replacements are done all the time. Find a qualified and esperienced contractor!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor