Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IFRs on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Box in the note

Status
Not open for further replies.

cubalibre000

Mechanical
Jan 27, 2006
1,070
Hi,
it's possible to have a note with a frame (box) around the note like the image attached ?

Thank you...

Using NX 8 and TC9.1
 
Replies continue below

Recommended for you

Hi cubalibre00,
i would use tabular note for that with the following settings (please refer to the image attached).In fact if you do not wish to use AUTO-FIT TEXT then you can use multiple rows (single column) and then feed each row with their respective texts (in this case you can get rid of the table borders in the middel through the Border Style options)
Best Regards
Kapil Sharma
 
 http://files.engineering.com/getfile.aspx?folder=6321c4e9-6b22-4cdc-b2e6-a49949998ea0&file=multiline_text.jpg
Hi guys,
thank you for the suggestion that is simple to actuate.

Thank you...

Using NX 8 and TC9.1
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor