Amirhossein_abbasi
Electrical
Hi
What are the methods for detecting neutral interruption in the tnc system (pen conductor) in Europe?
What are the methods for detecting neutral interruption in the tnc system (pen conductor) in Europe?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Broken neutral
- Thread starter Amirhossein_abbasi
- Start date
- Status
First PEN conductor is not the same as Neutral, it is a Protective Earth and Natural.
Not quite sure what you mean, no machines would work at the end user if the PEN conductor to the incoming central was broken so it's quite self indicating, since most of them need a neutral to work.
Unless you have a facility that only consists of direct connected 3-phase motors and nothing else.
Best Regards A
“Logic will get you from A to Z; imagination will get you everywhere.“
Albert Einstein
Not quite sure what you mean, no machines would work at the end user if the PEN conductor to the incoming central was broken so it's quite self indicating, since most of them need a neutral to work.
Unless you have a facility that only consists of direct connected 3-phase motors and nothing else.
Best Regards A
“Logic will get you from A to Z; imagination will get you everywhere.“
Albert Einstein
LittleInch
Petroleum
NO idea myself, but this might help?
PEN seems to be Protective Earth and Neutral -
Did you look?
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
PEN seems to be Protective Earth and Neutral -
Did you look?
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question