BRONZE VALVE JIS STANDARD 1

[skengg]

Hello,
i need to design bronze globe valve as per JIS standard 16K pressure requirement.though customer doesnt strictly need valve as per all clause of standard. only face to face, flange dimensions and wall thickness need to be as per JIS standard. i dont have access to JIS standard as our company have not dealt with it before. so, can anybody provide me JIS BRONZE wall thickness table or chart as per pressure rating(5k,16k etc.)?
and one more question can i Use BS 5154 standard's wall thickness as per equivilent to JIS pressure rating.
keeping in mind that all i need to comply valve strengthful enough to hold pressure rating.

 

[mk3223]

Refer to links below:

JIS Valve Standards -

https://www.engineeringtoolbox.com/jis-valve-standards-d_381.html

JIS Valve Catalog-

http://www.worldwidemetric.com/JIS_Catalog.pdf

I am not sure if you will see the valve wall thickness in the Code or Standards. But, you may buy the JIS valves, instead of designing it. Right?

 

[skengg]

Thanks mk 3223 for links.actually we dont have much scope market yet in JIS valves. it's just our owner of the company has one client who has requirement of JIS valves to export.
but its ok that information is enough to go through as reference with other standards. thanks.