I have several questions about the brushes that are used in hydrogenerators. I'm not referring here to those for static excitation but those that are used for protection and measurement. How many brushes of this type are used? It is a brush that makes contact with the machine shaft, is mounted isolated and used for detecting the first rotor earth fault. It also used another brush that makes contact with the shaft and is connected to ground for protection against electrostatic charging of the machine? Also brushes are also used for measuring current and voltage in the shaft? How many brushes which use usually. I would like more information regarding this.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Brushes for hidrogenerators.
- Thread starter nelvex
- Start date
Similar threads
- Locked
- Question
- Question