Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

BS 592 Grade B 1

Status
Not open for further replies.

djws

Mechanical
Mar 11, 2005
3
Looking for information on casting material BS 592 Grade B?

Thanks,

djws
 
Replies continue below

Recommended for you

BS 592 : 1957 was made obsolete and superceded by BS 3100 : 1967. Grade B was replaced by designation A2.

Chemical composition is C 0.35; Si 0.60; Mn 1.0; P .06; S .06 (P and S tightened to .05 each in BS 3100 : 1991)

Mechanical Properties are 490 N/mm2 min Tensile; 260 N/mm2 min Yield; 18% min Elongation; 90 degree bend at 1.5t radius; 20J min Charpy V Notch Impact (noting that either bend or impact may be specified at customer's discretion)

Need anything else?
 
Thanks mog69. That is plenty for now.

djws
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor