Bystar 3015 - 1997 - PLC - CPU 752 - Problem 2

[patchov]

Hello,
I have the following probleм. Аfter electric shock my PLC - CPU752 lost the program. The original program is 00X101A1.
My friend give me a 00X101G1 and i upload to PCL. The machine work and cut purfect, but i can't teach in tables.
in TecheIn Menu i trie to move Driving Pin to cutting or loading position
The error message is "release CT missing! > check".
I check all sensor and switch, check encoder step (AL090044-00_en.pdf) everything is right.
I guess the problem is in the newer program. If anyone can help me I will be very grateful.

https://youtu.be/bY1_PiPTVas

https://youtu.be/rbh4-nQxhgA

Machine: Bystar 3015(Oringe), BTL3500, year: 1997
my skype is: klox_bg
email: kaloyan@patchov.com
Kind Regards, Kaloyan

 

[krugtech]

is the cutting bridge at reference and is the loader parked? Have you configured the change table in the hidden menu? go into settings and then hit the right arrow until you cannot go anymore, then jump input 15 on the plc to 24 volts for a second, then you will be able to hit the right arrow more and configure the machine.


Chris Krug

http://krugtech.com/

Maximum Up-time, Minimum BS

 

[patchov]

i fix my problem, thank you!

https://www.youtube.com/edit?o=U&video_id=Z1Zo7Asbpho