Bystronic laser problem on chiller

[Mr.T]

Hello,

We are using a bystronic laser and we have a problem with the chiller, it displays the error message in the attachment. Any ideas from where to start debugging?

Thank you

 

[krugtech]

do you have a bypos, and are you getting bypos errors on the CNC?

Chris Krug

http://krugtech.com/

Maximum Up-time, Minimum BS

 

[miki11]

The problem may be in the bypos itself, one should look to see if it is dirty or maybe the intestines are wrongly turned.
Remove the hose from the bypass and measure how many liters of water are flowing per minute.