Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
C/L symbol
- Thread starter rossob
- Start date
JohnRBaker
Mechanical
All you have to do is, while in Drafting, go to...
Insert -> Symbol -> Custom Symbol...
...and select the 'Unigraphics Symbols' library. You will find a Center-Line symbol there along with several other useful items.
John R. Baker, P.E.
Product 'Evangelist'
NX Design
Siemens PLM Software Inc.
Cypress, CA
To an Engineer, the glass is twice as big as it needs to be.
Insert -> Symbol -> Custom Symbol...
...and select the 'Unigraphics Symbols' library. You will find a Center-Line symbol there along with several other useful items.
John R. Baker, P.E.
Product 'Evangelist'
NX Design
Siemens PLM Software Inc.
Cypress, CA
To an Engineer, the glass is twice as big as it needs to be.
- Thread starter
- #3
JohnRBaker
Mechanical
Ben,
You are 'aging yourself' ;-)
However, $c gives you a 'Circle'. The centerline symbol (there's actually 2 different ones in the default 'Blockfont') requires either the character set $u or $5.
John R. Baker, P.E.
Product 'Evangelist'
NX Design
Siemens PLM Software Inc.
Cypress, CA
To an Engineer, the glass is twice as big as it needs to be.
You are 'aging yourself' ;-)
However, $c gives you a 'Circle'. The centerline symbol (there's actually 2 different ones in the default 'Blockfont') requires either the character set $u or $5.
John R. Baker, P.E.
Product 'Evangelist'
NX Design
Siemens PLM Software Inc.
Cypress, CA
To an Engineer, the glass is twice as big as it needs to be.
- Status
