Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

C3-ilex rtu

Status
Not open for further replies.
stec69

stec69

Electrical
Feb 19, 2008
6
0
0
US
Recently we took over some rtu's and changed the protocol to DNP 3.0. The problem we have is the Binary points past point # 32 is changing with a delay of about 5 min. or so. Can anyone tell me what we are doing wrong?


Thanks
 
Status
Not open for further replies.

Similar threads

Alms88
  • Locked
  • Question
4 wire modbus RTU 1
Replies
2
Views
16
Alms88
Alms88
amurray
  • Locked
  • Question
RTUs - Trip/Close vs. Raise/Lower
Replies
3
Views
4
petetheswift
petetheswift
stec69
  • Locked
  • Question
Harris rtu d20 1
Replies
4
Views
5
stec69
stec69
gcaudill
  • Locked
  • Question
Modbus vs. Modbus RTU 2
Replies
5
Views
6
pchipkin
pchipkin
Back
Top