Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

C57.12.10 for over 100MVA?

Status
Not open for further replies.

BLadewig

Electrical
Mar 27, 2002
30
I've seen some transformer specifications that use C57.12.10-1997, even though these devices are 167MVA and the referenced standard says it only goes up to 100MVA. I searched but could not find a similar standard at the same voltage classes for bigger transformers.

Anyone out there know whether [a] there is such a standard, and I just need to look a little bit smarter, or that C57.12.10 can be used even for bigger equipment.

Thanks in advance for any thoughts on this matter.
 
Replies continue below

Recommended for you

Hmm...

"Due to the fact that IEEE Transformers Committee members participating in the development of NEMA copyrighted C57 documents are not indemnified by NEMA... we find it necessary to cease our work on the following documents:

ANSI C57.12.10...."

Helpful ;-)

Will continue looking...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor