Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in

CaCl2 Dehydration of LPG

Status
Not open for further replies.
Jose Cruz

Jose Cruz

Petroleum
Apr 9, 2020
2
0
0
PT
Hello!

Does anyone know a good book or have information on how to design a CaCl2 Dehydration for Liquefied Propane?

Best regards

José Cruz
 
Replies continue below

Recommended for you

Sort by date Sort by votes
There appears to be sufficient information on this in the GPSA in the chapter on dehydration/ subsection on liquid dehydration. General feedback indicated poor field performance, acid corrosion of downstream components with CaCl2 carryover into the dry gas or dry liquid exit stream. Most modern plants use mole sieves instead.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

1946ladjal
  • Locked
  • Question
Trim Bed for adsorption of heavy aromatics
Replies
2
Views
14
1946ladjal
1946ladjal
Vivaldi M. Smith
  • Locked
  • Question
High High trip of a natural draft Heater stack temperature 1
Replies
3
Views
22
Vivaldi M. Smith
Vivaldi M. Smith
ritesh bindal
  • Locked
  • Question
Doubt in the represntation of the PID Controllers in P&ID diagram
Replies
1
Views
19
Heaviside1925
Heaviside1925
Oxyset Services
  • Locked
  • Question
Maximum withdrawal rate of LPG from cylinders @ 15 degrees C
Replies
14
Views
15
crshears
crshears
yamoffathoo
  • Locked
  • Question
Does aeration of a vinyl acetate based emulsion containing carbon fibers reduce LDV?
Replies
3
Views
11
yamoffathoo
yamoffathoo
Back
Top