caesar II general questions

[geliberman]

Hi!, I am not so familiar with Caesar II, But I have some questions:
1-after running the program how can we change the supports to reduce the nozzle loads.
2-when we assign the friction coefficient to +y restrictions, then the program will start nonlinear solution and it will take long time, is that possible to neglect the coefficient for +y restrictions?
3-is that possible to model the PRV in CAESAR II or not.

Thank you

 

[DSB123]

Answers are : -
1 - Use experience
2 - depends if friction is important or not.
3 - yes

 

[psapiensone]

you need to learn about piping before to start with Caesar...