When calculating the section properties for effective sections under possible buckling conditions, is the original flange width used for each iteration or is the resultant width used on each successive iteration? I have not made this calculation in a while and I no longer have an adequate reference to direct my work.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Calculating effective sections
- Thread starter mac53
- Start date
Similar threads
