Calculating length of wire in existing electromagnet

[hubihubi2]

Hello,

I would like to ask for little help in calculating the length of wire in the existing electromagnet (bought from the shop).
I know that bought electromagnet is for DC, 24[V], 1.3[A], 33[W]. Diameter of the wire is 0.52mm. I kindly ask for help.


Thank you.

Regards

 

[dgallup]

If you know the bare wire diameter and the total resistance then assuming the resistivity is close to the standard 100% copper 5.4E-08 ohm-meter you can easily calculate the length of the wire.

----------------------------------------

The Help for this program was created in Windows Help format, which depends on a feature that isn't included in this version of Windows.