Dec 3, 2017 #1 tiftif Electrical Jul 16, 2010 13 I have some connected flat cables connected together in series and parallel. What software should be used to get the equivalent RLC parameters of this circuit?
I have some connected flat cables connected together in series and parallel. What software should be used to get the equivalent RLC parameters of this circuit?
Dec 7, 2017 #2 7anoter4 Electrical Oct 5, 2007 2,873 At first you have to state what kind of flat cable you need. On the web there are 20,000 types. See attached an example: http://www.molex.com/pdm_docs/sd/250010802_sd.pdfSecond you have to know what are the currents, number of wire, phase order and so on. Upvote 0 Downvote
At first you have to state what kind of flat cable you need. On the web there are 20,000 types. See attached an example: http://www.molex.com/pdm_docs/sd/250010802_sd.pdfSecond you have to know what are the currents, number of wire, phase order and so on.
Dec 7, 2017 #3 7anoter4 Electrical Oct 5, 2007 2,873 See also: http://www.wireandcabletips.com/introduction-flat-cables/ Upvote 0 Downvote
