Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

can i use ASTM A53 pipe 8" sch 80 at 400 C constant temp

Status
Not open for further replies.
franciscogilberto

franciscogilberto

Industrial
Oct 16, 2002
2
I am rebuilding a mixer that´s inside a salt bath inside a reactor. The only material that i have available is the 8 " sch. 80 ASTM A53 Gr. B, I´m worried about graphitizing. It will be working at 400 degrees Celcius constant. It will be used as support for the shaft wich is SS A420.
Please any advice
 
Status
Not open for further replies.

Similar threads

Josh Danziger
  • Locked
  • Question
1.4462 vs a4-80
Replies
9
Views
222
kingnero
kingnero
A M Contractor
  • Question
Tensile failure observed in Cast ASTM A494 Gr. CU5MCuC
Replies
9
Views
3K
EdStainless
EdStainless
Johnwoo1991
  • Question
F9 and F91 steel for low temp
Replies
1
Views
1K
EdStainless
EdStainless
spray_arc
  • Locked
  • Question
Unified Numbering System UNS, Can I assign to EN or GB C/S material
Replies
2
Views
160
spray_arc
spray_arc
Scott Price
  • Locked
  • Question
Magnetic Materials for moderately high temperature use 2
Replies
3
Views
310
Scott Price
Scott Price

Part and Inventory Search

Sponsor

Back
Top Bottom