Can somebody help me with this Abaqus error?

[chourouk]

Dear all,

For troubleshooting of this error, what can I do?

The job input file "cellule_de_kelvin.inp" has been submitted for analysis.
Error in job cellule_de_kelvin: AN INVALID POISSONS RATIO VALUE HAS BEEN SPECIFIED. THE POISSONS RATIO MUST BE LESS THAN THE VALUE OF .5
Error in job cellule_de_kelvin: AN INVALID POISSONS RATIO VALUE OF 3.0000 HAS BEEN SPECIFIED. THE POISSONS RATIO MUST BE LESS THAN THE VALUE OF .5
Job cellule_de_kelvin: Analysis Input File Processor aborted due to errors.
Error in job cellule_de_kelvin: Analysis Input File Processor exited with an error.
Job cellule_de_kelvin aborted due to errors.

 

[Mustaine3]

The error message is pretty clear. What's your problem with that?

 

[chourouk]

the problem is that both Poisson ratio I used are below 0.3.

 

[Mustaine3]

I'm quite sure they are not. Upload the .inp and we will see...

 

[chourouk]

in the .inp file the value of the Poisson ratio is 3.0 but in the python script i meet 0.343.

 

[chourouk]

this is the part of property definition.

 

[Mustaine3]

As expected. The .inp shows a value of 3.0, so the error message is correct.

So you have to find out how this value found his way into /CAE or the .inp when you say it wasn't applied by you.

 

[chourouk]

ok.thanks!!