Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Canadian Electrical Code "Secondary Sealing" in Hazardous areas requir

Status
Not open for further replies.
sagarini

sagarini

Electrical
Jan 13, 2009
6
My understanding is that this CEC "secondary seal" requirement only has to do with the conduit/cabling/gland system used to connect instrument/electrical devices. We are using armored cable with glands. Does this requirement mean that we need to put a conduit seal (EYS or other type) AND a cable gland on the end of each cable before connecting it to the instrument/electrical device?
Thanks in advance for any help.
 
Status
Not open for further replies.

Similar threads

Ofa KN
  • Question
Electrical Motor with Horn Connection for Hazardous Area Zone 1 or 2
Replies
1
Views
1K
jraef
jraef
NickParker
  • Locked
  • Question
Ex "db" or Ex "db eb" 1
Replies
3
Views
160
SilverfoxUK
SilverfoxUK
NickParker
  • Locked
  • Question
Ex "Px" Motors
Replies
1
Views
153
Gr8blu
Gr8blu
Giuseppe.Ing
  • Locked
  • Question
BESTCOMS_DECS100_11000 - Error "Communication port is not responding"
Replies
6
Views
253
davidbeach
davidbeach
zinki
  • Locked
  • Question
light in Hazardous areas 1
Replies
3
Views
90
crshears
crshears

Part and Inventory Search

Sponsor

Back
Top Bottom