Cannot open from Inventor Vault

[Transient1]

Hi,

I'm running Autodesk Inventor 11. Normally, I can just go to File>>Autodesk Data management Service>>Log In and log into the Vault. Once logged in I can open files from the vault. The problem is this option is now disabled. It is grayed out and cannot be selected.

I have checked my Log In status and it shows I am connected.

I have restarted the computer and logged in and out.

I know how to get files from the vault explorer, but going through Inventor is more convenient to me.

My vault administrator doesn't really know much about the vault and the one guy here who might know about it is on vacation. Any suggestions?

 

[PeterCharles]

No idea, but someone here might

http://www.mcadforums.com/forums/viewforum.php?f=36&sid=dc846cf0f10dbe6b53fd36de0cdba23f

 

[Transient1]

Thanks. I'll search for an answer there as well.

 

[Transient1]

The problem turned out to be that the project folder had been changed for the vault of interest. I changed the project folder back to the original one I used when first entering the vault of interest.